Command Line Reference Guide

Auth PAE State: Initialize
Backend State: Initialize
FTOS#
Example (mac-
address)
FTOS#show dot1x interface te 2/21 mac-address 00:00:01:00:07:00
802.1x information on Te 2/21:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Re-Authentication: Disable
Guest VLAN: Disable
Guest VLAN id: NONE
Auth-Fail VLAN: Disable
Auth-Fail VLAN id: NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass: Enable
Mac-Auth-Bypass Only: Disable
Tx Period: 5 seconds
Quiet Period: 60 seconds
ReAuth Max: 1
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 60 seconds
Max-EAP-Req: 2
Host Mode: MULTI_AUTH
Max-Supplicants: 128
Port status and State info for Supplicant: 00:00:01:00:07:00
Port Auth Status: AUTHORIZED(MAC-AUTH-BYPASS)
Untagged VLAN id: 4094
Auth PAE State: Authenticated
Backend State: Idle
FTOS#
164