Command Line Reference Guide

Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
dot1x tx-period
Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.
S5000
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
The range is 1 to 65535. The default is 30.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
show dot1x cos-mapping interface
Display the CoS priority-mapping table the RADIUS server provides and applied to authenticated supplicants on an
802.1X-enabled
S5000
Syntax
show dot1x cos-mapping interface type slot/port [mac-address
mac-address]
Parameters
interface type
slot/port
Enter the interface keyword followed by the interface type and
slot/port or number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
161