Command Line Reference Guide

Related
Commands
dot1x auth-type mab-only
dot1x max-eap-req
Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the
session times out.
S5000
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number Enter the number of times an EAP request is transmitted before a
session time-out. The range is 1 to 10. The default is 2.
Defaults 2
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network through the port. This
configuration is only takes effect in Multi-Auth mode.
S5000
Syntax
dot1x max-supplicants number
Parameters
number Enter the number of supplicants that can be authenticated on a single
port in Multi-Auth mode. The range is 1 to 128. The default is 128.
Defaults 128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
dot1x host-mode
157