Command Line Reference Guide

Parameters
interface type Enter the keyword interface and then enter the interface type.
slot/port Enter the slot and port numbers for the port.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show ethernet cfm port-statistics interface
tengigabitethernet 0/5
Port statistics for port: Te 0/5
==================================
RX Statistics
=============
Total CFM Pkts 75394 CCM Pkts 75394
LBM Pkts 0 LTM Pkts 0
LBR Pkts 0 LTR Pkts 0
Bad CFM Pkts 0 CFM Pkts Discarded 0
CFM Pkts forwarded 102417
TX Statistics
=============
Total CFM Pkts 10303 CCM Pkts 0
LBM Pkts 0 LTM Pkts 3
LBR Pkts 0 LTR Pkts 0
show ethernet cfm statistics
Display MEP statistics.
S5000
Syntax
show ethernet cfm statistics [domain {name | level} vlan-id
vlan-id mpid mpid]
Parameters
domain Enter the keyword domain to display statistics for a particular
domain.
name | level Enter the domain name or level.
vlan-id vlan-id Enter the keyword vlan-id and then enter a VLAN ID.
mpid mpid Enter the keyword mpid and then enter a maintenance point ID.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
146