Command Line Reference Guide
Parameters
start-delay
number
Enter a start-delay in seconds. The range is 3 to 100 seconds.
Defaults 3 ccms
Command Modes ETHERNET CFM
Command History
Version 9.0(1.3) Introduced on the S5000.
ping ethernet
Send a loopback message.
S5000
Syntax
ping ethernet domain [name l level] ma-name ma-name remote
{dest-mep-id | mac-addr mac-address} source {src-mep-id | port
interface}
Parameters
name
|
level
Enter the domain name or level.
ma-name
ma-
name
Enter the keyword ma-name and then enter the maintenance
association name.
dest-mep-id
Enter the MEP ID that is the target of the ping.
mac-addr
mac-
address
Enter the keyword mac-addr and then enter the MAC address that
is the target of the ping.
src-mep-id
Enter the MEP ID that originates the ping.
port
interface
Enter the keyword port and then enter the interface that originates
the ping.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
142