Command Line Reference Guide

write
Copy the current configuration to either the startup-configuration file or the terminal.
S5000
Syntax
write {memory | terminal}
Parameters
memory Enter the keyword memory to copy the current running configuration
to the startup configuration file. This command is similar to the copy
running-config startup-config command.
terminal Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the show
running-config
command.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The write memory command saves the running-configuration to the file labeled startup-
configuration. When using a LOCAL CONFIG FILE other than the startup-config not named
“startup-configuration” (for example, you used a specific file during the
boot config
command), the running-config is not saved to that file; use the copy command to save any
running-configuration changes to that local file.
Related
Commands
save – saves configurations created in BOOT_USER mode (BLI).
136