Command Line Reference Guide

FTOS#
Example (Buffer-
Info)
FTOS#show hardware stack-unit 0 buffer unit 0 port 1 buffer-
info
----- Buffer Stats for Unit 0 Port 1 -----
Maximum Shared Limit for the Port: 38336
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
FTOS#
Related
Commands
clear hardware system-flow – clears the statistics from selected hardware components.
show interfaces stack-unit – displays information on all interfaces on a specific S5000 stack
member.
show processes cpu – displays the CPU usage information based on the processes running in
an S5000.
show system – displays the current status of all the stack members or a specific member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S5000
Syntax
show hardware system-flow layer2 stack-unit unit-number port-
set port-pipe [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display
which system flow entry the packet hits and what queue the packet
takes as it dumps the raw system flow tables.
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The
range is 0 to 11.
port-set port-pipe
[counters]
Enter the keyword port-set followed by a port-pipe number. Valid
ports are 0 or 1.
(OPTIONAL) Enter the keyword counters to display hit counters for
the selected ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
-----------------------------------------------------------
1331