Command Line Reference Guide

terminal length
Configure the number of lines displayed on the terminal screen.
S5000
Syntax
terminal length screen-length
Parameters
screen-length
Enter a number of lines. Entering zero causes the terminal to display
without pausing. The range is 0 to 512.
Defaults 24 lines
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
traceroute
View a packet’s path to a specific device.
S5000
Syntax
traceroute {host | ip-address | ipv6-address | outgoing-
interface}
Parameters
host
Enter the name of device.
ip-address
Enter the IP address of the device in dotted decimal format.
ipv6-address
Enter the IPv6 address, in the x:x:x:x::x format, to which you are
testing connectivity.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros. Only one occurrence of this notation is permitted in an IPv6
address.
outgoing-
interface
(IPv6 link-local address) Enter one of the following interface types
and slot/port or number information. Valid slot numbers are 0-11. The
valid port numbers for each interface type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
133