Command Line Reference Guide

Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show hardware stack-unit – displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
hardware watchdog
Set the watchdog timer to trigger a reboot and restart the system.
S5000
Syntax
hardware watchdog
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command enables a hardware watchdog mechanism that automatically reboots an FTOS
switch/ router with a single unresponsive unit. This is a last resort mechanism intended to
prevent a manual power cycle.
show hardware layer2 acl
Display Layer 2 ACL data for the selected stack member and stack member port-pipe.
S5000
Syntax
show hardware layer2 acl stack-unit unit-number port-set port-
pipe
Parameters
stack-unit
unit-
number
Enter the keyword stack-unit followed by the unit number. The
range is 0 to 11.
port-set
port-pipe
Enter the keyword port-set followed by a port-pipe number. Valid
ports are 0 or 1.
Defaults none
Command Modes EXEC Privilege
1325