Command Line Reference Guide

counters Enter the keyword counters to clear the counters on the selected
stack member.
unit
port-pipe
counters
Enter the keyword unit along with a port-pipe number, from 0 to 1,
followed by the keyword counters to clear the counters on the
selected port-pipe.
NOTE: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the
data plane statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the
management statistics.
stack-port
stacking-port-
number
Enter the keywords stack-port followed by the port number of the
stacking port to clear the statistics of the particular stacking port. The
range is 0 to 52.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show hardware stack-unit – displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
S5000
Syntax
clear hardware system-flow layer2 stack-unit unit-number port-
set port-pipe counters
Parameters
stack-unit
unit-
number
Enter the keywords stack-unit followed by 0 to 11 for the stack
unit number and then enter one of the following command options to
clear a specific collection of data.
port-set
port-pipe
counters
Enter the keyword port-set followed by a port-pipe number. Valid
ports are 0 or 1. Then enter the keyword counters to clear the
system-flow counters on the selected port-pipe.
NOTE: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
Defaults none
1324