Command Line Reference Guide

ManualsBrandsDell Manualscomputer componentsNetworking S5000

1321

show buffer-profile stack-unit

Display the buffer profile that is applied to a stack-unit.

S5000

Syntax

show buffer-profile stack—unit unit-number

Parameters

stack-unit

unit-

number

Enter the keyword stack-unit followed by the unit number. The

range is 0 to 11. If you do not type a unit number, FTOS displays

buffer-profiles for all units.

Defaults none

Command Modes EXEC Privilege

Command History

Version 9.0(1.3) Introduced on the S5000.

Example (single

unit)

FTOS#show buffer-profile stack-unit 0

Stack-Unit Current Buffer-Profile Next-Boot Buffer-Profile

---------- ---------------------- ------------------------

0 Default (Dynamic) Default (Dynamic)

FTOS#

Commands

buffer-profile (Configuration) – creates a buffer profile that can be applied to an interface.

Hardware Commands

These commands display information from a hardware sub-component or ASIC.

clear hardware stack-unit

Clear statistics from selected hardware components.

S5000

Syntax

clear hardware stack-unit unit-number {counters | unit port-

pipe counters | cpu data-plane statistics | cpu party-bus

statistics | stack-port stacking-port-number}