Command Line Reference Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes output from the show vrrp ipv6 command shown in the Example
below.
Line beginning
with
Description
TenGigabitEthern
et...
Displays the Interface, the VRRP group ID, and the network address.
If the interface is no sending VRRP packets, 0.0.0.0 appears as the
network address.
VRF VRF instance to which the interface (on which the VRRP group is
configured) belongs.
State: master... Displays the interface’s state:
• Na/If (not available).
• master (MASTER virtual router).
• backup (BACKUP virtual router).
the interface’s priority and the IP address of the MASTER.
Hold Down:... This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements
received on the interface.
• Adv sent displays the number of VRRP advertisements sent
on the interface.
• Bad pkts rcvd displays the number of invalid packets
received on the interface.
Virtual MAC
address
Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the
interface is connected.
Tracking states... Displays information on the tracked interfaces or objects configured
for a VRRP group (track command), including:
• UP or DOWN state of the tracked interface or object (Up or
Dn).
1316