Command Line Reference Guide

database Enter the keyword database to display changes related to group,
prefix, and interface entries in the VRRP table.
packets Enter the keyword packets to enable debugging of VRRP control
packets.
state Enter the keyword state to enable debugging of VRRP state
changes
timer Enter the keyword timer to enable debugging of the VRRP timer.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If no options are specified, debug is active on all interfaces and all VRRP groups.
show vrrp ipv6
View the IPv6 VRRP groups that are active. If no VRRP groups are active, the FTOS returns No Active VRRP
group.
S5000
Syntax
show vrrp ipv6 [vrid] [interface-type slot/port] [brief]
Parameters
vrid
(OPTIONAL) Enter the virtual router identifier for the VRRP group to
view only that group. The range is 1 to 255.
interface-type
slot/port
Enter the interface type followed by slot/port or number information.
Valid slot numbers are 0-11. The valid port numbers for each interface
type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a table of information
on the VRRP groups on the S5000.
1315