Command Line Reference Guide

clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
S5000
Syntax
clear counters vrrp ipv6 [vrid ]
Parameters
vrid (OPTIONAL) Enter the number of an IPv6 VRRP group. The range is 1
to 255.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
debug vrrp ipv6
Allows you to enable debugging of VRRP.
S5000
Syntax
debug vrrp ipv6 interface-type slot/port | [interface] | [vrid]
{all | packets | state | timer}
Parameters
interface-type
slot/port
Enter the interface type followed by slot/port or number information.
Valid slot numbers are 0-11. The valid port numbers for each interface
type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
interface Enter the interface keyword to enable debugging of all groups on
all interfaces.
vrid (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword all to enable debugging of all VRRP groups.
bfd Enter the keyword bfd to enable debugging of all VFFP BFD
interactions.
1314