Manualshelf

Command Line Reference Guide

ManualsBrandsDell Manualscomputer componentsNetworking S5000
1301130213031304130513061307130813091310
59
Virtual Router Redundancy Protocol (VRRP)
The virtual router redundancy protocol (VRRP) is supported by the Dell Networking operating software (FTOS) on the
S5000 switch.
This chapter has the following sections:
• IPv4 VRRP Commands
• IPv6 VRRP Commands
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
S5000
Syntax
advertise-interval seconds
To return to the default settings, use the no advertise-interval command.
Parameters
seconds
Enter a number of seconds. The range is 1 to 255. The default is 1
second.
Defaults 1 second
Command Modes INTERFACE-VRRP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking recommends keeping the default setting for this command. If you do change
the time interval between VRRP advertisements on one router, you must change it on all
routers.
1301