Command Line Reference Guide

Usage
Information
The VLT domain ID must be the same between the two VLT devices. If the domain ID is not the
same, a syslog message is generated and VLT does not launch.
Related
Commands
show vlt – uses the show vlt brief command to display the delay-restore value.
vlt-peer-lag port-channel
Associate the port channel to the corresponding port channel in the VLT peer for the VLT connection to an attached
device.
S5000
Syntax
vlt-peer-lag port-channel id-number
Parameters
id-number Enter the port-channel number that connects to another port channel
in the VLT peer.
Defaults Not configured.
Command Modes INTERFACE PORT-CHANNEL
Command History
Version 9.0(1.3) Introduced on the S5000.
1299