Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS_VLTpeer1#show vlt statistics igmp-snoop
VLT Igmp-Snooping Statistics
-------------------------------
IGMP Info Pkts sent: 4
IGMP Info Pkts Rcvd: 1
IGMP Reg Request sent: 1
IGMP Reg Request rcvd: 2
IGMP Reg Response sent: 1
IGMP Reg Response rcvd: 1
IGMP PDU Tunnel Pkt sent:5
IGMP PDU Tunnel Pkt rcvd:10
IGMP Tunnel PDUs sent: 10
IGMP Tunnel PDUs rcvd: 19
system-mac
Configure the MAC address for the VLT domain on a VLT peer switch.
S5000
Syntax
system-mac mac-address
Parameters
mac-address Enter a MAC address in the format aaaa.bbbb.cccc.
Default Automatically assigned based on the primary priority and MAC address of each VLT peer.
Command Modes VLT DOMAIN
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you create a VLT domain on a switch, FTOS automatically creates a VLT-system MAC
address used for internal system operations. Use the system-mac command to explicitly
define the MAC address for the domain. You must also reconfigure the same MAC address on
the VLT peer switch.
Use this command to minimize the time required for the VLT system to synchronize the default
MAC address of the VLT domain on both peer switches when one peer switch reboots.
1297