Command Line Reference Guide

clear vlt statistics
Clear the statistics on VLT operations.
S5000
Syntax
clear vlt statistics
Command Modes EXEC
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show vlt statistics – displays statistics on VLT operations.
delay-restore
Configure the delay in bringing up VLT ports after reload or peer-link restoration between the VLT peer switches.
S5000
Syntax
delay-restore
Parameters
delay-restore Enter the amount of time, in seconds, to delay bringing up the VLT
ports after the VLTi device is reloaded or after the peer-link is
restored between VLT peer switches. The range 1 to 1200. The default
is 90 seconds.
Defaults Not configured.
Command Modes VLT DOMAIN
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the delay-restore parameter to delay the system from bringing up the VLT port for a
brief period to allow IGMP Snooping and Layer 3 routing protocols to converge. Use this
feature:
• after a VLT device is reloaded.
• if the Peer VLT device was up at the time the VLTi link failed to the time when it was
restored.
1290