Command Line Reference Guide

green | red |
yellow
Choose a color:
• Green: High priority packets that are the least preferred to
be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
Defaults All the packets on egress are marked with DEI 0.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
dei enable – enables DEI.
member
Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible
command in its configuration.
S5000
Syntax
member interface-type slot/port
To remove an interface from a Stackable VLAN, use the no member interface-type
slot/port command.
Parameters
interface-type
slot/port
Enter the interface type and slot/port or number information. Valid slot
numbers are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
Defaults Not configured.
Command Modes CONF-IF-VLAN
1281