Command Line Reference Guide

-- Power Supplies --
Unit Bay Status Type FanStatus
---------------------------------------------------------------
-------------
1 0 up AC up
1 1 up AC up
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2
Speed Fan3 Speed
---------------------------------------------------------------
-----------------------
1 absent or down
1 1 up up 12000 up 12000 up
12000 up 12000
1 2 up up 12000 up 12000 up
12000 up 12000
1 absent or down
Speed in RPM
FTOS#
Related
Commands
show version – displays the FTOS version.
show processes memory – displays memory usage based on running processes.
show hardware stack-unit – displays the data plane and management plane input and output
statistics of a particular stack member.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to perform
troubleshooting on S5000 switches.
S5000
Syntax
show tech-support [stack-unit unit-number | page]
Parameters
stack-unit unit-
number
(OPTIONAL) Enter the keyword stack-unit followed by a number.
The range is 0 to 11.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines. Press ENTER to view
the next line of text.
When using the pipe command ( | ), enter one of these keywords to
filter command output. For details about filtering commands, refer to
CLI Basics.
save Enter the keyword save to save the command output. flash: Save to
local flash drive (flash://filename [max 20 chars] ).
128