Command Line Reference Guide

Parameters
group-id Displays the current configuration of all uplink-state groups or a
specified group. The valid group-id values are 1 to 16.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show running-config uplink-state-group
!
no enable
uplink state track 1
downstream GigabitEthernet 0/2,4,6,11-19
upstream TengigabitEthernet 0/48, 52
upstream PortChannel 1
!
uplink state track 2
downstream GigabitEthernet 0/1,3,5,7-10
upstream TengigabitEthernet 0/56,60
Related
Commands
• show uplink-state-group – displays the status information on a specified uplink-state
group or all groups.
• uplink-state-group – creates an uplink-state group and enables the tracking of
upstream links.
show uplink-state-group
Display status information on a specified uplink-state group or all groups.
S5000
Syntax
show uplink-state-group [group-id] [detail]
Parameters
group-id Displays status information on a specified uplink-state group or all
groups. The valid group-id values are 1 to 16.
detail Displays additional status information on the upstream and
downstream interfaces in each group
Defaults none
Command Modes
• EXEC
• EXEC Privilege
1274