Command Line Reference Guide

• last: Enter this keyword to start daylight saving time in the
last week of the month.
start-day Enter the name of the day that you want daylight saving time to begin.
Use English three letter abbreviations; for example, Sun, Sat, Mon,
etc. The range is Sun to Sat.
start-month Enter the name of one of the 12 months in English.
start-time Enter the time in hours:minutes. For the hour variable, use the 24-hour
format; example, 17:15 is 5:15 pm.
end-week Enter the one of the following as the week that daylight saving ends:
• week-number: enter a number from 1 to 4 as the number of
the week to end daylight saving time.
• first: enter the keyword first to end daylight saving
time in the first week of the month.
• last: enter the keyword last to end daylight saving time in
the last week of the month.
end-day Enter the weekday name that you want daylight saving time to end.
Enter the weekdays using the three letter abbreviations; for example
Sun, Sat, Mon etc. The range is Sun to Sat.
end-month Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable, use
the 24-hour format; example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the summer-
time period. The range is 1 to 1440. The default is 60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
calendar set – sets the hardware clock.
clock summer-time date – sets a date (and time zone) on which to convert the switch to
daylight saving time on a one-time basis.
show clock – displays the current clock settings.
1257