Command Line Reference Guide
Defaults none
Command Modes INTERFACE (conf-if-
interface-slot/port
)
Command History
Version 9.0(1.3) Introduced on the S5000.
storm-control unknown-unicast (Configuration)
Configure the percentage of unknown-unicast traffic allowed in or out of the network.
S5000
Syntax
storm-control unknown-unicast [packets_per_second in]
To disable storm control for unknown-unicast traffic, use the no storm-control
unknown-unicast [
packets_per_second in] command.
Parameters
packets_per_sec
ond
in
Enter the packets per second of broadcast traffic allowed into the
network. The range is 0 to 33554431.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces.
storm-control unknown-unicast (Interface)
Configure percentage of unknown-unicast traffic allowed on an interface (ingress only).
S5000
Syntax
storm-control unknown-unicast [packets_per_second in]
To disable unknown-unicast storm control on the interface, use the no storm-control
unknown-unicast [
packets_per_second in] command.
Parameters
packets_per_sec
ond
in
Enter the packets per second of broadcast traffic allowed into the
network. The range is 0 to 33554431.
Defaults none
1250