Command Line Reference Guide

Defaults none
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show storm-control multicast tengigabitethernet 1/0
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------
Te 1/0 Ingress 5
FTOS#
show storm-control unknown-unicast
Display the storm control unknown-unicast configuration.
S5000
Syntax
show storm-control unknown-unicast [interface-type slot/port]
Parameters
interface-type
slot/port
(OPTIONAL) Enter one of the following keywords followed by slot/port
information to display the interface specific storm control
configuration. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
Defaults none
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
1247