Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS(config-stp)#show config
protocol spanning-tree 0
no disable
FTOS(config-stp)#
show spanning-tree 0
Display the spanning tree group configuration and status of interfaces in the spanning tree group.
S5000
Syntax
show spanning-tree 0 [active | brief | guard | interface type
slot/port | root | summary]
Parameters
0 Enter 0 (zero) to display information about that specific spanning tree
group.
active (OPTIONAL) Enter the keyword active to display only active
interfaces in spanning tree group 0.
brief (OPTIONAL) Enter the keyword brief to display a synopsis of the
spanning tree group configuration information.
guard (OPTIONAL) Enter the keyword guard to display the type of guard
enabled on an STP interface and the current port state.
interface type
slot/port
(OPTIONAL) Enter the keyword interface and the type slot/port of
the interface you want displayed. Type slot/port options are the
following:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
root (OPTIONAL) Enter the keyword root to display configuration
information on the spanning tree group root.
summary (OPTIONAL) Enter the keyword summary to only the number of ports
in the spanning tree group and their state.
Command Modes EXEC Privilege
1226