Command Line Reference Guide
Usage
Information
When the number of messages reach the limit you set with the logging history size
command, older messages are deleted as newer ones are added to the table.
Related
Commands
show logging – displays information logged to the history buffer.
logging monitor
Specify which messages are logged to Telnet applications.
S5000
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
level
Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings,
notifications, informational, or debugging. The default
is
7 or debugging.
Defaults 7 or debugging
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
default logging monitor – returns the logging monitor parameters to the default setting.
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging buffer,
Syslog server, or terminal lines.
S5000
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no logging
on
command.
Defaults Enabled.
Command Modes CONFIGURATION
1213