Command Line Reference Guide

logging history
Specify which messages are logged to the history table of the switch and the SNMP network management station (if
configured).
S5000
Syntax
logging history level
To return to the default values, use the no logging history command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following equivalent
words: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 4 or warnings.
Defaults warnings or 4
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you configure the snmp-server trap-source command, the system messages
logged to the history table are also sent to the SNMP network management station.
Related
Commands
show logging – displays information logged to the history buffer.
logging history size
Specify the number of messages stored in the FTOS logging history table.
S5000
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size Indicate a value as the number of messages to be stored. The range
is 0 to 500. The default is 1 message.
Defaults 1 message
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
1212