Command Line Reference Guide
Related
Commands
clear logging – clears the logging buffer.
default logging buffered – returns the logging buffered parameters to the default setting.
show logging – displays the logging setting and system messages in the internal buffer.
logging console
Specify which messages are logged to the console.
S5000
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
parameters: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Defaults level = 7; size = debugging
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
clear logging – clears the logging buffer.
default logging console – returns the logging console parameters to the default setting.
show logging – displays the logging setting and system messages in the internal buffer.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
S5000
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type
(OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
1210