Command Line Reference Guide

default logging monitor
Return to the default settings for messages logged to the terminal.
S5000
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
logging monitor – sets the logging monitor parameters.
terminal monitor – sends system messages to the terminal/monitor.
default logging trap
Return to the default settings for logging messages to the Syslog servers.
S5000
Syntax
default logging trap
Defaults level = 6 or informational
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
logging trap – limit messages logged to the Syslog servers based on severity.
logging
Configure an IP address or host name of a Syslog server where logging messages are sent. Multiple logging servers of
both IPv4 and/or IPv6 can be configured.
S5000
Syntax
logging {ipv4-address | ipv6-address | hostname}
To disable logging, use the no logging command.
1208