Command Line Reference Guide

Usage
Information
The oid-tree variable is a full sub-tree starting from 1.3.6 and can not specify the name of a
sub-tree or a MIB. The following Example configures a view named rview that allows access to
all objects under 1.3.6.1.
Example
FTOS# conf
FTOS#(conf) snmp-server view rview 1.3.6.1 included
Related
Commands
show running-config snmp – displays the SNMP running configuration.
snmp trap link-status
Enable the interface to send SNMP link traps, which indicate whether the interface is up or down.
S5000
Syntax
snmp trap link-status
To disable sending link trap messages, use the no snmp trap link-status command.
Defaults Enabled.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If the interface is expected to flap during normal usage, you could disable this command.
Syslog Commands
The following commands allow you to configure logging functions on all Dell Networking switches.
clear logging
Clear the messages in the logging buffer.
S5000
Syntax
clear logging
Defaults none
Command Modes EXEC Privilege
1206