Command Line Reference Guide
NOTE: The number of configurable users is limited to 16.
Example
FTOS# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv des56
d0452401a8c3ce42804fe80e3ba8763d
Usage
Information
The following command is an example of how to enter a plain-text password as the string
authpasswd for user authuser of group v3group.
Example
FTOS#conf
FTOS(conf)# snmp-server user authuser v3group v3 auth md5
authpasswd
Usage
Information
The following command configures a remote user named
n3user
with a v3 security model and
a security level of authNOPriv.
Example
FTOS#conf
FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3
udp-port 5009 3
auth md5 authpasswd
Related
Commands
show snmp user – displays the information configured on each SNMP user name.
snmp-server view
Configure an SNMPv3 view.
S5000
Syntax
snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree
{included | excluded} command.
Parameters
view-name
Enter the name of the view (not to exceed 20 characters).
oid-tree
Enter the OID sub tree for the view (not to exceed 20 characters).
included (OPTIONAL) Enter the keyword included to include the MIB family
in the view.
excluded (OPTIONAL) Enter the keyword excluded to exclude the MIB family
in the view.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
1205