Command Line Reference Guide

• v1v2creadg — maps to a community/security-name with
ro permissions.
• 1v2cwriteg — maps to a community/security-name rw
permissions.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c, or 3):
• 1 is the least secure version.
• 3 is the most secure of the security modes.
• 2c allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1.
auth (OPTIONAL) Enter the keyword auth to specify authentication of a
packet without encryption.
noauth (OPTIONAL) Enter the keyword noauth to specify no authentication
of a packet.
priv (OPTIONAL) Enter the keyword priv to specify both authentication
and then scrambling of the packet.
read name (OPTIONAL) Enter the keyword read followed by a name (a string of
up to 20 characters long) as the read view name. The default is
GlobalView and is assumed to be every object belonging to the
internet (1.3.6.1) OID space.
write name (OPTIONAL) Enter the keyword write followed by a name (a string
of up to 20 characters long) as the write view name.
notify name (OPTIONAL) Enter the keyword notify followed by a name (a string
of up to 20 characters long) as the notify view name.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string up to 16
characters long).
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 followed by the IPv6 access list
name (a string up to 16 characters long).
access-list-name
ipv6 access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following Example specifies the group named harig as a version 3 user requiring both
authentication and encryption and read access limited to the read named rview .
NOTE: The number of configurable groups is limited to 16 groups.
1198