Command Line Reference Guide

notification-
option
For the envmon notification-type, enter one of the following optional
parameters:
• cam-utilization
• fan
• supply
• temperature
For the snmp notification-type, enter one of the following optional
parameters:
• authentication
• coldstart
• linkdown
• linkup
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
FTOS supports up to 16 SNMP trap receivers.
For the cam-utilization notification option, the system generates syslogs and SNMP
traps when the L3 host table or route table utilization goes above the threshold.
If you do not configure this command, no traps controlled by this command are sent. If you do
not specify a notification-type and notification-option, all traps are enabled.
Related
Commands
snmp-server community – enables SNMP and sets the community string.
snmp-server engineID
Configure the name for both the local and remote SNMP engines on the router.
S5000
Syntax
snmp-server engineID [local engineID] [remote ip-address udp-
port port-number engineID]
To return to the default, use the no snmp-server engineID [local engineID]
[remote ip-address udp-port port-number engineID] command.
Parameters
local engineID
Enter the keyword local followed by the engine ID number that
identifies the copy of the SNMP on the local device.
Format (as specified in RFC 3411): 12 octets.
1196