Command Line Reference Guide

show sflow stack-unit
Display the sFlow information on a stack-unit.
S5000
Syntax
show sflow stack—unit {unit-number}
Parameters
unit-number (OPTIONAL) Enter the stack-unit keyword followed by the unit
number. The range is 0 to 11.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on S5000.
Usage
Information
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the Example
below always displays a value of zero.
Example
FTOS#show sflow stack-unit 0
Stack-Unit 0
Samples rcvd from h/w :0
Total UDP packets exported :0
UDP packets exported :0
UDP packets dropped :0
FTOS#
1188