Command Line Reference Guide

Parameters
512-869 Enter the key-size number for the server-generated RSA SSHv1 key.
The range is 512 to 869. The default is 768.
Defaults Key size 768
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The server-generated key is used for SSHv1 key-exchange.
ip ssh password-authentication
Enable password authentication for the SSH server.
S5000
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication
enable
command.
Parameters
enable Enter the keyword enable to enable password-authentication for
the SSH server.
Defaults Enabled
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
With password authentication enabled, you can authenticate using the local, RADIUS, or
TACACS+ password fallback order as configured.
ip ssh pub-key-file
Specify the file to be used for host-based authentication.
S5000
Syntax
ip ssh pub-key-file {WORD}
1160