Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
dot1x supplicant-timeout
Configure the amount of time after which exchanges with the supplicant time out.
S5000
Syntax
dot1x supplicant-timeout seconds
To return to the default, use theno dot1x supplicant-timeout command.
Parameters
seconds Enter a time-out value in seconds. The range is 1 to 300, where 300 is
implementation dependant. The default is 30.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
dot1x tx-period
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE.
S5000
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
The range is 1 to 31536000 (1 year). The default is 30.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
1154