Command Line Reference Guide

Defaults none
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The authenticator performs authentication only when port-control is set to auto.
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
S5000
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is 1 to 65535. The default is
30.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
dot1x reauthentication
Enable periodic re-authentication of the client.
S5000
Syntax
dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication
command.
Parameters
interval seconds (Optional) Enter the keyword interval followed by the interval
time, in seconds, after which re-authentication will be initiated. The
range is 1 to 31536000 (1 year). The default is
3600 (1 hour).
Defaults 3600 seconds (1 hour)
1152