Command Line Reference Guide

Related
Commands
dot1x auth-fail-vlan – configures a VLAN for authentication failures.
dot1x reauthentication – enables periodic re-authentication.
show dot1x interface – displays the 802.1X information on an interface.
dot1x max-eap-req
Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the
session times out.
S5000
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number
Enter the number of times an EAP request is transmitted before a
session time-out. The range is 1 to 10. The default is 2.
Defaults 2
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
interface range – configures a range of interfaces.
dot1x port-control
Enable port control on an interface.
S5000
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly authorize a
port.
auto Enter the keyword auto to authorize a port based on the 802.1X
operation result.
force-
unauthorized
Enter the keywords force-unauthorized to forcibly de-
authorize a port.
1151