Command Line Reference Guide
Parameters
retries
Enter a number of attempts that FTOS tries to locate a RADIUS server.
The range is zero (0) to 100. The default is 3 retries.
Defaults 3 retries
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
radius-server host – configures a RADIUS host.
radius-server timeout
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply to a request.
S5000
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds
Enter the number of seconds between an unsuccessful attempt and
the FTOS times out. The range is zero (0) to 1000 seconds. The default
is 5 seconds.
Defaults 5 seconds
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
radius-server host – configures a RADIUS host.
TACACS+ Commands
FTOS supports TACACS+ as an alternate method for login authentication.
1144