Command Line Reference Guide
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before timing out.
S5000
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Enter a number of seconds the software waits before logging you out.
The range is:
• VTY: 1 to 30 seconds, the default is 30 seconds.
• Console: 1 to 300 seconds, the default is 0 seconds (no
timeout).
• AUX: 1 to 300 seconds, the default is 0 seconds (no timeout).
Defaults See above.
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The software measures the period of inactivity defined in this command as the period between
consecutive keystrokes. For example, if your password is “password” you can enter “p” and
wait 29 seconds to enter the next letter.
username
Establish an authentication system based on user names.
S5000
Syntax
username name [access-class access-list-name] [nopassword |
{password | secret} [encryption-type] password] [privilege
level]
If you do not want a specific user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name
Enter a text string for the name of the user up to 63 characters.
access-class
access-list-name
Enter the keywords access-class followed by the name of a
configured access control list (either a IP access control list or MAC
access control list).
nopassword Enter the keyword nopassword to specify that the user should not
enter a password.
1138