Command Line Reference Guide

• interface for INTERFACE modes
• line for LINE mode
• route-map for ROUTE-MAP mode
• router for ROUTER OSPF, ROUTER RIP, ROUTER ISIS and
ROUTER BGP modes
level level Enter the keyword level followed by a number for the access level.
The range is 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes and
commands.
reset Enter the keyword reset to return the security level to the default
setting.
command Enter the command’s keywords to assign the command to a certain
access level. You can enter one or all of the keywords.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the enable password command to define a password for the level to which you are
assigning privilege or access.
privilege level (LINE mode)
Change the access level for users on the terminal lines.
S5000
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level command.
Parameters
level level
Enter the keyword level followed by a number for the access level.
The range is 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes.
Defaults level = 15
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
1135