Command Line Reference Guide
To return to the default, use the no password-attributes [min-length number]
[max-retry number] [character-restriction [upper number] [lower
number] [numeric number] [special-char number]] command.
Parameters
min-length
number
(OPTIONAL) Enter the keywords min-length followed by the
number of characters. The range is 0 to 32 characters.
max-retry
number
(OPTIONAL) Enter the keywords max-retry followed by the
number of maximum password retries. The range is 0 to 16.
character-
restriction
(OPTIONAL) Enter the keywords character-restriction to
indicate a character restriction for the password.
upper
number
(OPTIONAL) Enter the keyword upper followed the upper number.
The range is 0 to 31.
lower
number
(OPTIONAL) Enter the keyword lower followed the lower number.
The range is 0 to 31.
numeric
number
(OPTIONAL) Enter the keyword numeric followed the numeric
number. The range is 0 to 31.
special-char
number
(OPTIONAL) Enter the keywords special-char followed the
number of special characters permitted. The range is 0 to 31.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
password – specifies a password for users on terminal lines.
privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
S5000
Syntax
privilege mode {level level command | reset command}
To delete access to a level and command, use the no privilege mode level level
command command.
Parameters
mode
Enter one of the following keywords as the mode for which you are
controlling access:
• configure for CONFIGURATION mode
• exec for EXEC mode
1134