Command Line Reference Guide

show processes cpu
Display CPU usage information based on processes running in an S5000.
S5000
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit
unit-number | summary | ipc | memory [stack-unit 0-11]]
Parameters
management-unit
1-99
(OPTIONAL) Display processes running in the control processor. The
1-99 variable sets the number of tasks to display in order of the
highest CPU usage in the past five (5) seconds.
details Display all running processes (except sysdlp). Refer to Example
(management-unit).
stack-unit unit-
number
(OPTIONAL) Enter the keyword stack-unit followed by a number.
The range is 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary view of
CPU usage for all members of the stack. Refer to Example (summary).
ipc (OPTIONAL) Enter the keyword ipc to display inter-process
communication statistics.
memory (OPTIONAL) Enter the keyword memory to display memory statistics.
Refer to Example (memory).
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
(summary)
FTOS#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-----------------------------------------
UNIT0 6% 6% 5%
FTOS#
Example
(management-
unit)
FTOS#show processes cpu management-unit
CPU utilization for five seconds: 15%/0%; one minute: 14%;
five minutes: 14%
PID Runtime(ms) Invoked uSecs 5Sec
1Min 5Min TTY Process
0x00000000 10610 1061 10000 8.00%
8.00% 8.00% 0 system
0x00000136 31767650 3176765 10000 6.90%
6.52% 6.48% 0 sysdlp
0x0000012f 1123270 112327 10000 0.39%
0.20% 0.26% 0 sysd
0x000000f1 124940 12494 10000 0.20%
0.07% 0.03% 0 igmp
0x000001bd 40560 4056 10000 0.20%
113