Command Line Reference Guide

tacacs-server host – specifies a TACACS+ server host.
access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
S5000
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name
Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
line – applies an authentication method list to the designated terminal lines.
ip access-list standard – names (or selects) a standard access list to filter based on the IP
address.
ip access-list extended – names (or selects) an extended access list based on the IP
addresses or protocols.
enable password
Change the password for the enable command.
S5000
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type]
password [level level] command.
Parameters
level
level
(OPTIONAL) Enter the keyword level followed by a number as the
level of access. The range is from 1 to 15.
encryption-type
(OPTIONAL) Enter the number 7 or 0 as the encryption type.
Enter a 7 followed by a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Networking router.
1129