Command Line Reference Guide

privilege level (LINE mode)
Change the access level for users on the terminal lines.
S5000
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level command.
Parameters
level
level
Enter the keyword level followed by a number for the access level.
The range is 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes.
Defaults
level
= 15
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
Authentication and Password Commands
Use the following the commands to manage access to the system
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
S5000
Syntax
aaa authentication enable {default | method-list-name} method
[... method2]
To return to the default setting, use the no aaa authentication enable {default
| method-list-name} method [... method2] command.
Parameters
default Enter the keyword default followed by the authentication methods
to use as the default sequence of methods to be used for the Enable
log-in. The default is default enable.
method-list-name
Enter a text string (up to 16 characters long) to name the list of
enabled authentication methods activated at log in.
method
Enter one of the following methods:
1126