Command Line Reference Guide

privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
S5000
Syntax
privilege mode {level level command | reset command}
To delete access to a level and command, use the no privilege mode level level
command command.
Parameters
mode Enter one of the following keywords as the mode for which you are
controlling access:
• configure for CONFIGURATION mode
• exec for EXEC mode
• interface for INTERFACE modes
• line for LINE mode
• route-map for ROUTE-MAP mode
• router for ROUTER OSPF, ROUTER RIP, ROUTER ISIS and
ROUTER BGP modes
level level Enter the keyword level followed by a number for the access level.
The range is 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes and
commands.
reset Enter the keyword reset to return the security level to the default
setting.
command Enter the command’s keywords to assign the command to a certain
access level. You can enter one or all of the keywords.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the enable password command to define a password for the level to which you are
assigning privilege or access.
1125