Command Line Reference Guide
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
DCBX
LLDP
SNMP
FTOS#
Example (media)
FTOS#show inventory media
Slot Port Type Media Serial
Number F10Qualified
---------------------------------------------------------------
---------------
1 0 Media not present or accessible
1 1 Media not present or accessible
1 2 Media not present or accessible
1 3 Media not present or accessible
1 4 UNKNOWN UNKNOWN
PNJ2R98 Yes
1 5 SFP+ 10GBASE-CU7M
APF10520050667 Yes
1 6 UNKNOWN UNKNOWN
CCX111430001545 No
1 7 UNKNOWN UNKNOWN
UJM03PM Yes
1 8 Media not present or accessible
1 9 SFP+ 10GBASE-CU1M
APF11380028W68 Yes
1 10 SFP 1000BASE-SX
PMM6PG1 Yes
1 11 SFP 1000BASE-SX
PMM6N25 Yes
1 48 QSFP 40GBASE-CR4-1M
APF12310017UL7 Yes
1 52 QSFP 40GBASE-CR4-5M
APF114800218NL Yes
1 56 QSFP 40GBASE-CR4-1M
APF11490011J2P Yes
1 60 Media not present or accessible
FTOS#
Related
Commands
show interfaces – displays a specific interface configuration.
show interfaces transceiver – displays the physical status and operational status of an
installed transceiver. The output also displays the transceiver’s serial number.
112