Command Line Reference Guide

[50/2] via 1.1.10.2, 00:00:18, Vlan 10
208.250.42.0/24 auto-summary
show running-config rip
Display the current RIP configuration.
S5000
Syntax
show running-config rip
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
show running-config rip
!
router rip
distribute-list Test1 in
distribute-list Test21 out
network 10.0.0.0
passive-interface TenGigabitEthernet 2/0
neighbor 20.20.20.20
redistribute ospf 999
version 2
timers basic
Manipulate the RIP timers for routing updates, invalid, holddown times, and flush time.
S5000
Syntax
timers basic update invalid holddown flush
To return to the default settings, use the no timers basic command.
Parameters
update Enter the number of seconds to specify the rate at which RIP routing
updates are sent. The range is zero (0) to 4294967295. The default is 30
seconds.
invalid Enter the number of seconds to specify the time interval before
routing updates are declared invalid or expired. The invalid value
should be at least three times the update timer value. The range is
zero (0) to 4294967295. The default is 180 seconds.
1095