Command Line Reference Guide

Command Modes ROUTER RIP
Command History
Version 9.0(1.3) Introduced on the S5000.
redistribute ospf
Redistribute routing information from an OSPF process.
S5000
Syntax
redistribute ospf process-id [match external {1 | 2} | match
internal | metric metric-value] [route-map map-name]
To disable redistribution, use the no redistribute ospf process-id [match
external {1 | 2} | match internal | metric metric-value]
[route-map
map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to be
redistributed. The range is 1 to 65355.
match external {1
| 2}
(OPTIONAL) Enter the keywords match external followed by the
numbers
1 or 2 to indicated that external 1 routes or external 2 routes
should be redistributed.
match internal (OPTIONAL) Enter the keywords match internal to indicate that
internal routes should be redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number as the
metric value. The range is 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 9.0(1.3) Introduced on the S5000.
1092