Command Line Reference Guide

Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is
displayed first. All CPU and port information is displayed unless a specific port or CPU is
specified. Traffic information is displayed for router ports only; not for management interfaces.
The traffic statistics are collected only after the debug cpu-traffic-stats command is
executed; not from the system bootup.
NOTE: After debugging is complete, use the no debug cpu-traffic-stats
command to shut off traffic statistics collection.
Example
FTOS#show cpu-traffic-stats
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 7/12 Total
packets:304392
LLC:0, SNAP:0, IP:0, ARP:0, other:304392
Unicast:0, Multicast:304392, Broadcast:0
FTOS#
Related
Commands
debug cpu-traffic-stats – enables CPU traffic statistics for debugging.
show debugging
View a list of all enabled debugging processes.
S5000
Syntax
show debugging
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show debug
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
TenGigabitEthernet 4/0-3,5-6,10-11,20
TenGigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
TenGigabitEthernet 5/0,2,4,6,8,10,12,14,16
FTOS#
109